Product features
- Cubic air cooler for demanding cooling and deep freezing requirements
- Particularly suitable for unpackaged goods stored for long periods of time in environments with a high air humidity
- Low moisture loss thanks to Roller's highly efficient aligned tube system
- Compact design specially for use in narrow aisles
- High efficiency thanks to EC fan technology as standard and an effective defrosting system
Reliable, proven air coolers
Thanks to its compact design, this highly efficient air cooler is particularly suitable for commercial and industrial cold stores and low-temperature storage rooms with narrow aisles.
With its high air flow volume and optional air streamer, even very long shelving aisles can be uniformly cooled.
The HVS/HVST is used in these areas of application
Storage & Logistics
The requirements for cooling in warehouse logistics could not be more diverse. The tasks are very specific:
In plus cold stores for fruit and vegetables, it is crucial that the sensitive chilled goods are stored in the right conditions and cooled gently. Dairy products are highly perishable and require a closed cold chain. Ripening chambers turn fruit varieties into products ready for sale.
In deep-freeze warehouses, uniform temperature distribution is important, reliable air coolers protect against thawing of the goods. In order-picking rooms, the impact on employees must be minimised. Roller offers a variety of individual solutions for all applications.
Commercial refrigeration
The range of refrigeration technology for the retail trade is broad. Whether it's a butcher's shop, bakery, flower shop, petrol station, restaurant or supermarket - each sector has its own requirements to ensure optimum product quality.
One thing is always in the foreground: reliability in refrigeration technology when it comes to failure safety, hygiene or energy efficiency. Roller is the specialist for air coolers, evaporators and heat exchangers for the commercial sector.
Food Industry
Especially high demands are placed on refrigeration in the food industry.
Hygiene, energy efficiency and reliability are the top priorities.
But even when it comes to requirements for refrigerants, corrosion protection, material combinations, practical fin spacing, optimised tube and fin geometries, uniform air distribution or energy efficiency, Roller offers the optimised solution for every performance range and every application with its wide product range of evaporators and air coolers.
Process cooling
The manufacturing industry depends on the reliable maintenance of specific temperatures to ensure high quality of the goods produced. Precise temperature control, reliability and energy efficiency are a priority.
Roller offers a wide range of heat exchangers and air coolers for process cooling.
Talk to us.
- Storage & Logistics
- Commercial refrigeration
- Food Industry
- Process cooling
Product benefits
Your advantages at HVS/HVST
Strong fins thickness
Thick fins allow cleaning with a high-pressure cleaner
EC-fans
for energy-efficient operation as standard
Double drip pan construction
to avoid condensation
Swivelling fans
for better access allow more thorough cleaning of the heat exchanger (optional)
Corrosion protection
Various types of heat exchanger corrosion protection for use in aggressive environments
High-performance tube systems:
Aligned Roller high-performance tube systems with internally grooved tubes (HVS/T___EP)
Easily retrofittable heating rods:
MS heating rods for coil defrosting (tR >0 °C)
75% lower defrost energy costs
Air cooler defrost concept to reduce the defrost frequency to up to one defrost a day and saves up to 75% energy costs
Features
All product advantages at a glance
General
- Cooling capacity from 0.5 to 25 kW
- Temperature range: HVS: 0 – 50 °C / HVST: -35 – 20 °C
- Fin spacings 4.5 / 7 / 10 mm
- Defrosting: electric (HVST), optional: Brine, hot gas, water sprinklers, splash plates
- Operating pressure up to 25 bar
Easy assembly
- Easy access via side doors, completely removable
- Stainless steel hanging rails
- Connections with threaded nipple, ventilation and drain valve (water or brine mode)
- Drain heating can easily be retrofitted
- Defrost heating wired to external terminal boxes on the side (HVST)
Inspection and cleaning
- Double insulated drip pan prevents condensation forming on the underside of the tray (optional)
- Removable side doors
- Aligned tube pattern and fin spacings of up to 12 mm for easy cleaning
- Constructive properties geared to the HACCP concept
- Baffle plate to prevent condensation forming on the housing
- Thick fins (0.3 mm) for extra stability during cleaning
Airflow routing
- Increased air throw thanks to textile connection with integrated rectifier
- Special fans with particularly high external pressure (option)
- Fully adjustable EC fans
- Textile hose adapter for textile hose application
Energy efficiency
- Highly efficient heat exchanger with aligned tube system for delicate applications
- EC fans for energy-efficient operation as standard (not XX4 - XX6)
- Large heat exchanger surfaces for reduced moisture loss and defrosting
- Adjustment of the air volume flow according to the cooling load via external controller (0 - 10 V or Modbus signal with EC fans)
- Defrost damper and defrost hood (accessories) for efficient defrosting
- ERP compliant fans
- Air cooler energy efficiency class up to top mark "A"
Corrosion protection
- Corrosion-resistant aluminium housing with scratchproof powder coating
- Corrosion protection for the heat exchanger and housing to withstand a range of environmental conditions
- Stainless steel housing (optional)
- Copper fin
- All corrosion protection variants at a glance
Defrosting
- Heating rods in the coil for reliable defrosting, in aluminium housing to prevent vapours
- Textile defrost damper to isolate the air cooler on the pressure side during defrosting (accessory)
- HVST defrost safety thermostat (accessory)
- Frame heating for electrically heating the fan ring and to avoid ice bridges during defrosting (accessory)
- Defrost hood uses the positive trapped heat which ideally remains in the air cooler during defrosting
- Defrosting using brine circuit
Accessories
Find suitable accessories for the HVS / HVST
Defrost hood:
Less warming of the room owing to defrost heat, optimized defrosting process
Swivelling fans:
For easy, thorough cleaning of the heat exchanger
Streamer
The streamer increases the air throw in longer cold rooms
Air filter grille
for on-site use of air filters in the air intake (15mm thickness)
Further accessories
- MS heating rods for coil defrosting tR >0 °C - can be retrofitted
- Defrost safety thermostat
- Auxiliary heating for condensation drain
- Textile hose connection for the straightforward installation of textile hoses for uniform air distribution without draughts
- Insulated drip pan prevents condensation forming on the outer side
References
Event gastronomy - HVS - Taggenbrunn
The Taggenbrunn hotel requires reliable food cooling systems for its exclusive guest receptions and concerts. High-quality food and drinks and especially the wine collection must be cooled to the right temperature. The attractive air coolers from Roller fit in ideally in the castle architecture. The air coolers were delivered to the wholesaler Schiessl in Pörtschach straight from the factory.
| Application | Gastronomy |
|---|---|
| Address | Taggenbrunn / Austria |
| Fluid | R404A |
| Product | HVS |
Fish processing - HVST - Lauenroth Fischfeinkost
When processing and storing fish products, the salt content and vinegar-based marinades place particularly high demands on the evaporators in terms of corrosion protection, hygiene and defrosting. For direct processing, appliances with stainless steel housings and corrosion-protected heat exchangers are therefore used. For the deep-freezing of the packaged goods in this fish delicatessen, special attention was paid to efficient operation and a stable high air flow rate for even temperature distribution.
| Application | Fish processing |
|---|---|
| Address | Lüdersdorf / Germany |
| Fluid | HFC |
| Product | HVST |
Deep-freeze warehouse - HVST - Medical technology
Medical products are delicate goods which need to be stored at a stable temperature. For this low-temperature storage room at a biotech company with a temperature of -35 °C, efficient defrosting was required too. The HVST evaporator from Roller was designed with an aligned tube system, optimum heating rod placement, a large fin spacing and a defrost damper for optimum defrosting.
| Application | Deep-freeze warehouse |
|---|---|
| Address | Bergisch Gladbach / Germany |
| Fluid | R404A |
| Product | HVST 1008 EC EP |
Packaged goods - HVST - Klüvers
The cooling of packaged goods in large cold rooms is often a matter of evenly applying cold to the goods at every point in the room. The air performance must be correspondingly high. Küvers uses HVST type Roller evaporators with powerful EC fans. The condensers are Roller KVNs with gold lacquer fins, which serve as corrosion protection against the salty sea air.
| Application | Packaged goods |
|---|---|
| Address | Niendorf / Deutschland |
| Fluid | HFC |
| Product | HVST / KVN |
Technical data
All important technical data at a glance
| Product name | HVS...ES | HVS..EP | HVST...ES | HVST..EP | |
| Capacity range | 0,5 - 19 kW | 0,7 - 25 kW | 0,5 - 19 kW | 0,7 - 25 kW | |
| Temperature range | 0 - 50°C | 0 - 50°C | -35 to +20°C | -35 to +20°C | |
| Defrost heater | Without | Without | Block and drip tray | Block and drip tray | |
| Tubes | Plain tube | Internally grooved | Plain tube | Internally grooved | |
| Tube system | Alligned | Alligned | Alligned | Alligned | |
| Number of fans | 1 - 2 | 1 - 2 | 1 - 2 | 1 - 2 | |
| Fan typ | EC, AC / suction / IP 54 | EC, AC / suction / IP 54 | EC, AC / suction / IP 54 | EC, AC / suction / IP 54 | |
| Fan size | 300 / 400 / 450 /500 mm | 300 / 400 / 450 /500 mm | 300 / 400 / 450 /500 mm | 300 / 400 / 450 /500 mm | |
| Fin spacing | 4,5 / 7 / 10 mm | 4,5 / 7 / 10 mm | 4,5 / 7 / 10 mm | 4,5 / 7 / 10 mm | |
| Energy efficiency class | B to E | B to E | A to D | A to D |
How can we help you?
We consult you competently and comprehensively!
Make a concrete enquiry now!
Tel.: +49 (0) 7156 / 2001-29
lucas.hengster@walterroller.de
